DPP Cold Air Intake Kit + Battery Relocation Kit To Suit Ford Falcon FG / FG-X Barra

Ford Falcon XR6 FG Turboside Intake & Battery Relocation

Ready to turbocharge your Barra engine? The DPP Turboside Intake and Battery Relocation Kit should be your first stop! By relocating the battery to the passenger side of your vehicle, you create space to run your intake directly behind the driver's side headlight.

Why does this matter? Well, it means a straight shot for the air to enter the turbocharger, eliminating the need for a maze of ducting in your engine bay. Say goodbye to clutter and hello to streamlined performance. With this kit, your Barra engine will be ready to unleash its full potential.

Our DPP kit includes:
- DPP Airbox Lid (CURRENTLY OUT OF STOCK, YOUR LID WILL BE PLACED ON BACKORDER)
- 4-inch alloy hard pipe including rocker cover breather port.
- 45-degree 5-ply silicone elbow.
- 2 Stainless hose clamps.
- Blanking plug (if you don’t require a breather from your rocker cover).
- 3/8 barb (for your rocker cover breather).
- DPP high-flow air-filter (4x9 inch) (with clamp).
- Pre-made positive battery cable with red terminal cover.
- Pre-made earth battery cable with black terminal cover.
- 2-piece battery tray.
- Battery hold-down clamps & bracket.

Fitting Notes:
Mounting holes are pre-drilled. You will just need to set the lid in its place and use the self-drilling screws to secure it. Ideally, you can use Rivnuts if you have access to them.
Trimming of the 45-degree silicone hose will be necessary as we provide a full-length piece to cater for a wide range of turbo setups.

We don't supply hose for the breather setup. You will need a length of 10mm / 3/8in hose to plumb it in.
Our intake kit will fit (most) hot side Intercooler pipes including OEM ones, but we cannot guarantee they will fit every single one.

We have a drop-down option for different compressor covers. Please ensure you're choosing the correct one to suit so we can ship out the right parts!
Option 1: Standard 3-inch inlet compressor cover.
Option 2: Upgraded 4-inch inlet compressor cover.

The battery hold-down clamps will need to be trimmed down after install. We have left them slightly long to suit multiple battery heights