Demon Pro D68/70E 1050HP Turbocharger
Built For High-Power Custom Turbo Projects, The Demon Pro D68/70E Offers Turbocharger Capability Of Up To 1,050HP.
This Configuration Features A 0.96 A/R Turbine Housing, T4 Open-Flange Inlet, V-Band Outlet And External Wastegate Configuration, Making It Suitable For Custom High-Performance Builds.
This Configuration Also Features An Anti-Surge Compressor Housing, Designed To Help Maintain Stable Compressor Operation Across A Wide Range Of Operating Conditions.
Turbo Specifications1,050 HP capability
Rotating Assembly
Wheel diameters are shown as inducer / exducer.
- Turbo Power Capability
- 1,050 HP
- Compressor Wheel
- 68 / 92 MM
- Turbine Wheel
- 78 / 70 MM
Turbine Housing
- Turbine Housing A/R
- 0.96
- Turbine Inlet
- T4 Open-Flange Inlet
- Turbine Outlet
- V-Band Outlet (ring and clamp included)
- Wastegate Configuration
- External
Compressor Housing
- Compressor Inlet
- 4-Inch Inlet
- Compressor Outlet
- 2.5-Inch Outlet
- Anti-Surge Housing
- Yes
- Speed Sensor Provision
- No
HP is the Turbo’s power-support capability. Actual engine output depends on the engine, fuel system, supporting modifications and tune.
What’s in the Box?Turbocharger and supplied hardware
- Turbocharger
- Included
- Turbine outlet V-band ring and clamp
- Included
- T4 gasket
- Included
- Oil feed fitting
- Included
- Oil drain flange
- Included
Engine Applications4 engine examples
Engine examples for custom Turbo builds. Engine code alone does not confirm direct-fit installation; the manifold, exhaust connections, lines and available clearance need to suit the setup.
Common QuestionsPower ratings, configuration and supplied parts
Will my engine make the advertised HP?
The 1,050HP Figure Represents The Turbocharger's Potential Power-Support Capability, Not Guaranteed Engine Output Or A Measured Wheel-Power Result. Actual Power Depends On Engine Specifications, Fuel System Capacity, Supporting Modifications And Tuning.
